class Gtk2Reactor(_glibbase.GlibReactorBase): (source)
Known subclasses: twisted.internet.glib2reactor.Glib2Reactor
Method | __init__ |
Undocumented |
Constant | INFLAGS |
Undocumented |
Constant | OUTFLAGS |
Undocumented |
Constant | _POLL_DISCONNECTED |
Undocumented |
Inherited from GlibReactorBase
:
Method | addReader |
Add a FileDescriptor for monitoring of data available to read. |
Method | addWriter |
Add a FileDescriptor for monitoring ability to write data. |
Method | callLater |
Schedule a DelayedCall. |
Method | crash |
Crash the reactor. |
Method | getReaders |
Retrieve the list of current FileDescriptor monitored for reading. |
Method | getWriters |
Retrieve the list of current FileDescriptor monitored for writing. |
Method | input_add |
Undocumented |
Method | iterate |
One iteration of the event loop, for trial's use. |
Method | removeAll |
Remove monitoring for all registered FileDescriptor s. |
Method | removeReader |
Stop monitoring the given FileDescriptor for reading. |
Method | removeWriter |
Stop monitoring the given FileDescriptor for writing. |
Method | run |
Run the reactor. |
Method | stop |
Stop the reactor. |
Method | _add |
No summary |
Method | _handleSignals |
Extend the basic signal handling logic to also support handling SIGCHLD to know when to try to reap child processes. |
Method | _ioEventCallback |
Called by event loop when an I/O event occurs. |
Method | _remove |
Remove monitoring the given FileDescriptor for either reading or writing. If it's still monitored for the other operation, we re-register the FileDescriptor for only that operation. |
Method | _reschedule |
Schedule a glib timeout for _simulate. |
Method | _simulate |
Run timers, and then reschedule glib timeout for next scheduled event. |
Instance Variable | _crash |
Undocumented |
Instance Variable | _glib |
Undocumented |
Instance Variable | _gtk |
Undocumented |
Instance Variable | _iteration |
Undocumented |
Instance Variable | _pending |
Undocumented |
Instance Variable | _reads |
A set of FileDescriptor instances currently monitored for reading. |
Instance Variable | _run |
Undocumented |
Instance Variable | _simtag |
A GSource handle for the next simulate call. |
Instance Variable | _source_remove |
Undocumented |
Instance Variable | _sources |
A dictionary mapping FileDescriptor instances to GSource handles. |
Instance Variable | _timeout_add |
Undocumented |
Instance Variable | _writes |
A set of FileDescriptor instances currently monitored for writing. |
Inherited from PosixReactorBase
(via GlibReactorBase
):
Method | adoptDatagramPort |
Add an existing listening SOCK_DGRAM socket to the reactor to monitor for read and write readiness. |
Method | adoptStreamConnection |
|
Method | adoptStreamPort |
Create a new IListeningPort from an already-initialized socket. |
Method | connectSSL |
Connect a client Protocol to a remote SSL socket. |
Method | connectTCP |
Connect a TCP client. |
Method | connectUNIX |
Connect a client protocol to a UNIX socket. |
Method | connectUNIXDatagram |
Connects a ConnectedDatagramProtocol instance to a path. |
Method | installWaker |
Install a `waker' to allow threads and signals to wake up the IO thread. |
Method | listenMulticast |
Connects a given DatagramProtocol to the given numeric UDP port. |
Method | listenSSL |
Connects a given protocol factory to the given numeric TCP/IP port. The connection is a SSL one, using contexts created by the context factory. |
Method | listenTCP |
Connects a given protocol factory to the given numeric TCP/IP port. |
Method | listenUDP |
Connects a given DatagramProtocol to the given numeric UDP port. |
Method | listenUNIX |
Listen on a UNIX socket. |
Method | listenUNIXDatagram |
Connects a given DatagramProtocol to the given path. |
Method | spawnProcess |
Spawn a process, with a process protocol. |
Instance Variable | waker |
Undocumented |
Method | _removeAll |
Remove all readers and writers, and list of removed IReadDescriptor s and IWriteDescriptor s. |
Method | _uninstallHandler |
If a child waker was created and installed, uninstall it now. |
Class Variable | _supportedAddressFamilies |
Undocumented |
Instance Variable | _childWaker |
None or a reference to the _SIGCHLDWaker which is used to properly notice child process termination. |
Inherited from _SignalReactorMixin
(via GlibReactorBase
, PosixReactorBase
):
Method | mainLoop |
Undocumented |
Method | startRunning |
Extend the base implementation in order to remember whether signal handlers should be installed later. |
Method | _reallyStartRunning |
Extend the base implementation by also installing signal handlers, if self._installSignalHandlers is true. |
Instance Variable | _installSignalHandlers |
A flag which indicates whether any signal handlers will be installed during startup. This includes handlers for SIGCHLD to monitor child processes, and SIGINT, SIGTERM, and SIGBREAK to stop the reactor. |
Inherited from _DisconnectSelectableMixin
(via GlibReactorBase
, PosixReactorBase
):
Method | _disconnectSelectable |
Utility function for disconnecting a selectable. |
Inherited from ReactorBase
(via GlibReactorBase
, PosixReactorBase
):
Method | addSystemEventTrigger |
See twisted.internet.interfaces.IReactorCore.addSystemEventTrigger. |
Method | callFromThread |
See twisted.internet.interfaces.IReactorFromThreads.callFromThread . |
Method | callInThread |
See twisted.internet.interfaces.IReactorInThreads.callInThread . |
Method | callWhenRunning |
See twisted.internet.interfaces.IReactorCore.callWhenRunning. |
Method | disconnectAll |
Disconnect every reader, and writer in the system. |
Method | doIteration |
Do one iteration over the readers and writers which have been added. |
Method | fireSystemEvent |
See twisted.internet.interfaces.IReactorCore.fireSystemEvent. |
Method | getDelayedCalls |
No summary |
Method | getThreadPool |
See twisted.internet.interfaces.IReactorThreads.getThreadPool . |
Method | removeSystemEventTrigger |
See twisted.internet.interfaces.IReactorCore.removeSystemEventTrigger. |
Method | resolve |
Return a Deferred that will resolve a hostname. |
Method | runUntilCurrent |
Run all pending timed calls. |
Method | sigBreak |
Handle a SIGBREAK interrupt. |
Method | sigInt |
Handle a SIGINT interrupt. |
Method | sigTerm |
Handle a SIGTERM interrupt. |
Method | startRunning |
Method called when reactor starts: do some initialization and fire startup events. |
Method | suggestThreadPoolSize |
See twisted.internet.interfaces.IReactorThreads.suggestThreadPoolSize . |
Method | timeout |
Determine the longest time the reactor may sleep (waiting on I/O notification, perhaps) before it must wake up to service a time-related event. |
Method | wakeUp |
Wake up the event loop. |
Class Variable | __name__ |
Undocumented |
Class Variable | installed |
Undocumented |
Class Variable | seconds |
Get the current time in seconds. |
Instance Variable | running |
See IReactorCore.running |
Instance Variable | threadCallQueue |
Undocumented |
Instance Variable | threadpool |
Undocumented |
Instance Variable | threadpoolShutdownID |
Undocumented |
Instance Variable | usingThreads |
Undocumented |
Method | _cancelCallLater |
Undocumented |
Method | _checkProcessArgs |
Check for valid arguments and environment to spawnProcess. |
Method | _initThreadPool |
Create the threadpool accessible with callFromThread. |
Method | _initThreads |
Undocumented |
Method | _insertNewDelayedCalls |
Undocumented |
Method | _moveCallLaterSooner |
Undocumented |
Method | _reallyStartRunning |
Method called to transition to the running state. This should happen in the during startup event trigger phase. |
Method | _stopThreadPool |
No summary |
Class Variable | _lock |
Undocumented |
Instance Variable | _cancellations |
Undocumented |
Instance Variable | _eventTriggers |
Undocumented |
Instance Variable | _exitSignal |
See _ISupportsExitSignalCapturing._exitSignal |
Instance Variable | _internalReaders |
Undocumented |
Instance Variable | _justStopped |
A flag which is true between the time reactor.stop is called and the time the shutdown system event is fired. This is used to determine whether that event should be fired after each iteration through the mainloop. This should be replaced with an explicit state machine. |
Instance Variable | _newTimedCalls |
Undocumented |
Instance Variable | _pendingTimedCalls |
Undocumented |
Instance Variable | _registerAsIOThread |
A flag controlling whether the reactor will register the thread it is running in as the I/O thread when it starts. If True, registration will be done, otherwise it will not be. |
Instance Variable | _started |
A flag which is true from the time reactor.run is called until the time reactor.run returns. This is used to prevent calls to reactor.run on a running reactor. This should be replaced with an explicit state machine. |
Instance Variable | _startedBefore |
Undocumented |
Instance Variable | _stopped |
A flag which is true between paired calls to reactor.run and reactor.stop. This should be replaced with an explicit state machine. |
Instance Variable | _threadpoolStartupID |
Undocumented |
Inherited from PluggableResolverMixin
(via GlibReactorBase
, PosixReactorBase
, ReactorBase
):
Method | installNameResolver |
See IReactorPluggableNameResolver . |
Method | installResolver |
See IReactorPluggableResolver . |
Instance Variable | resolver |
The installed IResolverSimple . |
Property | nameResolver |
Implementation of read-only IReactorPluggableNameResolver.nameResolver . |
Instance Variable | _nameResolver |
The installed IHostnameResolver . |
Inherited from _PollLikeMixin
(via GlibReactorBase
):
Method | _doReadOrWrite |
fd is available for read or write, do the work and raise errors if necessary. |